![1.25](/images/new-backgrounds/92643/9264353x1.webp)
1.25 | MAINTENANCE | 1.25 |
|
|
|
MAINTENANCE
WARNING - PREVENT ACCIDENTS: Stop the engine and disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower.
ENGINE
1.Engine Cowl
2.Carburettor
3.Spark Plug / Lead
4.Muffler Guard
5.Muffler
6.Oil filler Cap/ Dipstick
7.Start Grip
8.Fuel Cap
9.Finger Guard
10.Air Cleaner
THROTTLE CABLE ADJUSTMENT
Remove two screws securing the engine cowl and remove the cowl to expose the throttle mechanism on the front of the engine. Loosen the outer cable clamp screw (1) and move the governor control lever (2) to the left as far as possible. Insert a large, flat blade screw driver (3) into the slot in the engine control bracket (4) at the angle shown. Push the gov- ernor control lever to the right until it just touches the screw driver blade. Move the throttle control lever to the ‘fast’ position (not the ‘choke’ position) and
2
3
1
4
CS039
485101MT210999A