1.26 | OPERATING THE TRACTOR | 1.26 |
SWEEPER COLLECTOR LIFT LEVER
The sweeper collector can be lifted for transport and lowered into work by means of the lift lever situated to the right of the seat.
Raising the lever will lower the sweeper collector to the ground. Allow the lever to fall back until it rests on the front of the sweeper collector housing.
Raise the sweeper/collector into the transport position by pulling the lift lever forwards and down until it reaches its lowest position adjacent to and parallel with the platform.
WARNING: PREVENT ACCIDENTS - When operating the lift lever with the sweeper collector attached to the tractor, be sure to maintain a firm grip on the lever. Inadvertent release of the lever whilst it is in
ATTACHING/DETACHING THE SWEEPER COLLECTOR
Attaching the sweeper collector:
- Attaching the sweeper collector to the tractor will be easier if both units are on firm, level ground.
- Raise both the tractor seat and the rear guard flap.
- Position the sweeper collector behind the tractor in line with rear lift linkages.
- Operate the sweeper collector lift lever so as to position the lift linkage on the tractor into its lowest position.
- Move the sweeper collector forwards, raising the hooks on the linkage bracket so that they engage the upper pins on the tractor lift linkage brackets (Refer fig. 1)
- Open the sweeper collector latch locking mechanism.
Fig.1
150005MA010302A
