THE INFORMATION MODE
The console features an information mode that keeps track of treadmill usage information and allows you to select a system of measurement.
To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown:
An “E” for English miles or an “M” for metric kilometers will appear in the lower right corner of the display. Press the Speed increase button to change the unit of mea- surement, if desired.
Note: The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the circuit breaker to the reset position, and in-
sert the key into the console. However, when you remove the key, the displays will re-
main lit, although the buttons will not function. If the demo
mode is turned on, a “d” will
appear in the lower right display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
The upper left corner of the display will show the total number of hours that the treadmill has been used.
The lower left corner of the display will show the total number of miles or kilome- ters that the walking belt has moved.
To exit the information mode, remove the key from the console.
16
