1.3LED Indicators

The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below.

3G9W

HSPA 7.2Mbps Wi-Fi Router

 

 

 

 

 

 

 

 

 

 

 

t

 

Power

LAN

1

LAN

2

LAN

3

LAN

4

-Fi

Inter

ne

2G

 

 

 

 

Wi

3G

Signal Strength

Lo

Med

High

w

 

 

LED

 

Color

Mode

Description

 

 

 

 

 

POWER

 

Green

On

Power on

 

 

 

 

 

 

 

 

Off

Power off

 

 

 

 

LAN 1~4

Green

On

Powered device connected to the associated port (includes devices with wake-on-

 

 

 

 

LAN capability where a slight voltage is supplied to an Ethernet connection)

 

 

 

 

 

 

 

 

Off

No activity, modem powered off, no cable or no powered device connected to the

 

 

 

 

associated port

 

 

 

 

 

 

 

 

Blink

LAN activity present (traffic in either direction)

 

 

 

 

 

Wi-Fi

 

Green

On

The wireless module is ready.

 

 

 

 

 

 

 

 

Off

The wireless module is not installed.

 

 

 

 

 

 

 

 

Blink

Data being transmitted or received over Wi-Fi.

 

 

 

 

Internet

Green

Blink

Internet connection established.

 

 

 

 

 

 

 

 

Off

No connection to the internet or router powered off

 

 

 

 

 

3G

 

Green

On

Internet connection established.

 

 

 

 

 

 

 

 

Blink

Connecting with UMTS cellular station

 

 

 

 

 

 

 

 

Off

No connection with UMTS cellular station, no activity or router powered off.

 

 

 

 

 

2G

 

Green

On

Internet connection established.

 

 

 

 

 

 

 

 

Blink

Connecting to an EDGE, GPRS or GSM cellular station

 

 

 

 

 

 

 

 

Off

No connection with EDGE, GPRS or GSM cellular station, no activity or router

 

 

 

 

powered off.

 

 

 

 

 

Low

 

Green

On

Low signal strength

 

 

 

 

 

 

 

 

Off

No activity, router powered off or on other signal strength

 

 

 

 

 

Med

 

Green

On

Medium signal strength

 

 

 

 

 

 

 

 

Off

No activity, router powered off or on other signal strength

 

 

 

 

 

High

 

Green

On

High signal strength

 

 

 

 

 

 

 

 

Off

No activity, router powered off or on other signal strength

NOTE:

The six LEDs on the right side of the front panel display (Internet, 3G, 2G, Low, Med, High) will cycle on and off if PIN code protection is

 

activated. In this case, you should consult section 4.2.1 PIN Code Protection (page 21) for further instructions.

– YML902

Page 8
Image 8
NetComm 3G9W LED Indicators, Color Mode Description, Green Power on Off Power off LAN 1~4, Associated port, Powered off