PIN Configuration, PIN Code Protection, PIN Lock Off | NetComm 3G9W

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

4.2PIN Configuration

This screen allows for changes to the 3G SIM card PIN code protection settings.

NOTE:	If you have entered the incorrect PIN 3 times, your SIM card will be locked for your security. Please call your 3G Provider for
	assistance.

4.2.1PIN Code Protection

PIN code protection prevents the use of a SIM card by unauthorized persons. To use the 3G internet service with this router however, the PIN code protection must be disabled. If the SIM card inserted into the Router is locked with a PIN code, the web user interface will display the following screen after login.

PIN Lock Off

If you wish to connect to the Internet using a PIN locked SIM card, you must first turn PIN code protection Off. Select PIN lock Off, enter the PIN Code and click Save/Apply. The following dialog box should now appear.

YML902 – 21

Image 21

NetComm 3G9W manual PIN Configuration, PIN Code Protection, PIN Lock Off

Contents

3G9W Hspa 7.2 Mbps Wi-Fi Router Preface Important Notice and Safety Precaution Table of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Package Contents Features Color Mode Description LED IndicatorsGreen Power on Off Power off LAN 1~4 Powered off Rear Panel Rear panel contains the ports for data and power connections Quick Setup Setup Procedure Quick SetupConfigure the router through the Web User Interface WUI Save the router configuration and reboot see section Web User Interface Web User Interface Default Settings TCP/IP Settings Dhcp ModeClick OK to submit the settings To login to the web interface, follow the steps below Login Procedure Basic / Home Web User Interface Homepage Fields Description Following table provides further details 3G Settings 3G Settings 3G Service SetupThis menu includes 3G service Setup and PIN Configuration 21 for instruction on how to fix this PIN Configuration PIN Code ProtectionPIN Lock Off YML902 PIN Code Change Wireless Wireless Option Description Setup Security Click Save/Apply to configure the wireless security options Authentication Card. If the Ssid does not match, access is deniedWEP Encryption will also be enabled Select Ssid Configuration Default is disabled Broadcast and multicast messages. The default isAP Isolation Point can be linked 802.11b only mode 54g ModeMbit/s Dsss specification as described in Ieee Std 54g Protection MAC Filter Deny Rejects access for the specified MAC addressesMAC Address Can be added Wireless Bridge Click Save/Apply to implement new configuration settingsFeature Options Station Info Authorized Lists those devices with authorized accessIs generated randomly Associated Management Management Device Settings Restore Default Update Settings Default screen upon successful installation Access Control YML902 Simple Network Time Protocol Sntp Save and Reboot Advanced Setup This chapter explains advanced setup for your Router Advanced Setup Local Area Network LAN Configuration ProtocolIgmp Snooping No client subscribes to a multicast group Port Forwarding Network Address Translation NAT Selected the port ranges are automatically configured Is selected the port ranges are automatically configuredOptions Description External Port End Port Triggering Trigger Port End Demilitarized DMZ HostTrigger Protocol TCP, TCP/UDP or UDP Open Port Start Open Port End Security Options Description Parental Control User Name User-defined label for this restrictionMAC address of the PC running the browser Routing YML902 YML902 Domain Name Servers DNS DNS Server Configuration Options Descriptions Dynamic DNS Status Status Test Description Diagnostics System Log Click View System Log. The results are displayed as follows 3G Status Status Description Status Status BCS Battery Charge LevelQuality Ec/Io Strongest cells Network Registration Interface Shows connection interfaces Statistics Service Shows the service type Select Route to display the paths the Router has found RouteField Description But may be needed by routing daemons ARP Dynamic Host Configuration Protocol DhcpClick ARP to display the ARP information Click Dhcp to display the Dhcp information CLI commands Via Telnet Show all CLI commands CLI commands via Telnet Reset/reboot device Radio Signal StrengthEnd the telnet session Connection status Radio Band Imsi & Imei read Wireless LAN mode set and read Options Configure basic Wireless LAN features Means auto select channel. Default value YML902 Example Configure wireless LAN security Valid value string of 79 characters Valid value string of 8 ~ 63 characters Wlan macfilter --mode disabledallowdeny --add MACaddress Configure wireless LAN MAC filter Description configure the wireless bridge Synopsis Configure Wireless Bridge Wireless Distribution System/WDSDescription set remote bridge MAC address Rmac2 MACaddress Options --config Show wireless LAN interface configurationsBasic Advance Wlan security wpaGTKRekey = Email support@netcomm.com.au Contact Information