Configure wireless LAN security | NetComm 3G9W guide

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

Configure wireless LAN security

Description: Enable or disable and configure the wireless LAN security. This router supports different types of security such as: WEP, 802.1X, WPA and WPA2.

Synopsis:
wlan security open
[--	wep <enableddisabled>] [--		keybit <64128>]
	[--nkey1 <keyStr>] [--		nkey2 <keyStr>]
[--	nkey3 <keyStr>] [--	nkey4 <keyStr>]
[--	keyidx <1234>]
wlan security shared (wep have to enable)
[--	wep <enableddisabled>] [--		keybit <64128>]
[--	nkey1 <keyStr>] [--	nkey2 <keyStr>]
[--	nkey3 <keyStr>] [--	nkey4 <keyStr>]
[--	keyidx <1234>]
wlan security radius (wep have to enable)
[--	rasip <serverIp>] [--	raspt <portVal>] [--			raskey <”raskeyStr”>]
[--	wep <enableddisabled>] [--		keybit <64128>]
[--	nkey2 <keyStr>] [--	nkey3 <keyStr>]
[--	keyidx <23>]
wlan security wpa / wpa2 / wpa2mix
[--	wlPreauth <01>] [--	wlNetReauth <interval>]
[--	wpaenc <tkipaestkip+aes>] [--			rekey <interval>]
[--	rasip <serverIp>] [--	raspt <portVal>] [--			raskey <”raskeyStr”>]
[--	wep <enableddisabled>] [--		keybit <64128>]
[--	nkey2 <keyStr>] [--	nkey3 <keyStr>]
[--	keyidx <23>]
wlan security psk / psk2 / psk2mix
[--	wpaenc <tkipaestkip+aes>] [--			rekey <interval>]
[--	pskey <”pskeyStr”>]
[--	wep <enableddisabled>] [--		keybit <64128>]
[--	nkey2 <keyStr>] [--	nkey3 <keyStr>]
[--	keyidx <23>]

YML902 – 79

Image 79

NetComm 3G9W manual Configure wireless LAN security

Contents

3G9W Hspa 7.2 Mbps Wi-Fi Router Preface Important Notice and Safety Precaution Table of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Package Contents Features Powered off LED IndicatorsColor Mode Description Green Power on Off Power off LAN 1~4 Rear Panel Rear panel contains the ports for data and power connections Quick Setup Save the router configuration and reboot see section Quick SetupSetup Procedure Configure the router through the Web User Interface WUI Web User Interface Web User Interface Default Settings Dhcp Mode TCP/IP SettingsClick OK to submit the settings To login to the web interface, follow the steps below Login Procedure Basic / Home Web User Interface Homepage Fields Description Following table provides further details 3G Settings 3G Service Setup 3G SettingsThis menu includes 3G service Setup and PIN Configuration 21 for instruction on how to fix this PIN Code Protection PIN ConfigurationPIN Lock Off YML902 PIN Code Change Wireless Wireless Option Description Setup Security Click Save/Apply to configure the wireless security options Select Ssid Card. If the Ssid does not match, access is deniedAuthentication WEP Encryption will also be enabled Configuration Point can be linked Broadcast and multicast messages. The default isDefault is disabled AP Isolation 54g Protection 54g Mode802.11b only mode Mbit/s Dsss specification as described in Ieee Std Can be added Deny Rejects access for the specified MAC addressesMAC Filter MAC Address Click Save/Apply to implement new configuration settings Wireless BridgeFeature Options Associated Authorized Lists those devices with authorized accessStation Info Is generated randomly Management Management Device Settings Restore Default Update Settings Default screen upon successful installation Access Control YML902 Simple Network Time Protocol Sntp Save and Reboot Advanced Setup This chapter explains advanced setup for your Router Advanced Setup No client subscribes to a multicast group Configuration ProtocolLocal Area Network LAN Igmp Snooping Port Forwarding Network Address Translation NAT External Port End Is selected the port ranges are automatically configuredSelected the port ranges are automatically configured Options Description Port Triggering Open Port End Demilitarized DMZ HostTrigger Port End Trigger Protocol TCP, TCP/UDP or UDP Open Port Start Security Options Description User Name User-defined label for this restriction Parental ControlMAC address of the PC running the browser Routing YML902 YML902 Domain Name Servers DNS DNS Server Configuration Options Descriptions Dynamic DNS Status Status Test Description Diagnostics System Log Click View System Log. The results are displayed as follows 3G Status Status Description Strongest cells Network Registration Status BCS Battery Charge LevelStatus Quality Ec/Io Interface Shows connection interfaces Statistics Service Shows the service type But may be needed by routing daemons RouteSelect Route to display the paths the Router has found Field Description Click Dhcp to display the Dhcp information Dynamic Host Configuration Protocol DhcpARP Click ARP to display the ARP information CLI commands Via Telnet Show all CLI commands CLI commands via Telnet Radio Signal Strength Reset/reboot deviceEnd the telnet session Connection status Radio Band Imsi & Imei read Wireless LAN mode set and read Options Configure basic Wireless LAN features Means auto select channel. Default value YML902 Example Configure wireless LAN security Valid value string of 79 characters Valid value string of 8 ~ 63 characters Wlan macfilter --mode disabledallowdeny --add MACaddress Configure wireless LAN MAC filter Rmac2 MACaddress Configure Wireless Bridge Wireless Distribution System/WDSDescription configure the wireless bridge Synopsis Description set remote bridge MAC address Advance Show wireless LAN interface configurationsOptions --config Basic Wlan security wpaGTKRekey = Email support@netcomm.com.au Contact Information