Imsi & Imei read, Wireless LAN mode set and read | NetComm 3G9W

IMSI & IMEI read

Description: Display the IMSI and IMEI value

Synopsis: sierra show --imsi sierra show --imei

Example:

> sierra show --imsi

imsi: 466974800524867 > sierra show --imei

IMEI: 354219010024303

Wireless LAN mode set and read

Description: Allows user to configure the Wireless LAN interfaces on the 3G router.

This command can be use to configure basic feature, security feature, wireless bridge feature and MAC filter features of the wireless LAN interface.

Synopsis:

> wlan

wlan command usage : wlan config [option] wlan security [option] wlan macfilter [option] wlan wds [option] wlan info [option] wlan –help

Each option will be explained separately below.

Note:	The settings changed from these commands take effect immediately and will be updated on the web page
	1.	Please enable the wireless BEFORE changing other wireless settings.
	2.	The wlan command will save the configuration into flash memory and the new settings will be saved.

Since the settings changed from wlan command take effect immediately, it is not recommended to modify the wireless settings through the Web UI at the same time.

74 – YML902

Image 74

NetComm 3G9W manual Imsi & Imei read, Wireless LAN mode set and read

Contents

3G9W Hspa 7.2 Mbps Wi-Fi Router Important Notice and Safety Precaution Preface Table of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Features Package Contents Green Power on Off Power off LAN 1~4 LED IndicatorsColor Mode Description Powered off Rear panel contains the ports for data and power connections Rear Panel Quick Setup Configure the router through the Web User Interface WUI Quick SetupSetup Procedure Save the router configuration and reboot see section Web User Interface Default Settings Web User Interface Click OK to submit the settings TCP/IP SettingsDhcp Mode Login Procedure To login to the web interface, follow the steps below Web User Interface Homepage Basic / Home Following table provides further details Fields Description 3G Settings This menu includes 3G service Setup and PIN Configuration 3G Settings3G Service Setup 21 for instruction on how to fix this PIN Lock Off PIN ConfigurationPIN Code Protection YML902 PIN Code Change Wireless Wireless Setup Option Description Click Save/Apply to configure the wireless security options Security WEP Encryption will also be enabled Card. If the Ssid does not match, access is deniedAuthentication Select Ssid Configuration AP Isolation Broadcast and multicast messages. The default isDefault is disabled Point can be linked Mbit/s Dsss specification as described in Ieee Std 54g Mode802.11b only mode 54g Protection MAC Address Deny Rejects access for the specified MAC addressesMAC Filter Can be added Feature Options Wireless BridgeClick Save/Apply to implement new configuration settings Is generated randomly Authorized Lists those devices with authorized accessStation Info Associated Management Device Settings Management Update Settings Restore Default Default screen upon successful installation Access Control YML902 Simple Network Time Protocol Sntp Save and Reboot Advanced Setup Advanced Setup This chapter explains advanced setup for your Router Igmp Snooping Configuration ProtocolLocal Area Network LAN No client subscribes to a multicast group Network Address Translation NAT Port Forwarding Options Description Is selected the port ranges are automatically configuredSelected the port ranges are automatically configured External Port End Port Triggering Trigger Protocol TCP, TCP/UDP or UDP Open Port Start Demilitarized DMZ HostTrigger Port End Open Port End Security Options Description MAC address of the PC running the browser Parental ControlUser Name User-defined label for this restriction Routing YML902 YML902 DNS Server Configuration Domain Name Servers DNS Dynamic DNS Options Descriptions Status Status Diagnostics Test Description System Log Click View System Log. The results are displayed as follows 3G Status Status Description Quality Ec/Io Status BCS Battery Charge LevelStatus Strongest cells Network Registration Statistics Interface Shows connection interfaces Service Shows the service type Field Description RouteSelect Route to display the paths the Router has found But may be needed by routing daemons Click ARP to display the ARP information Dynamic Host Configuration Protocol DhcpARP Click Dhcp to display the Dhcp information CLI commands Via Telnet CLI commands via Telnet Show all CLI commands End the telnet session Reset/reboot deviceRadio Signal Strength Radio Band Connection status Wireless LAN mode set and read Imsi & Imei read Configure basic Wireless LAN features Options Means auto select channel. Default value YML902 Example Configure wireless LAN security Valid value string of 79 characters Valid value string of 8 ~ 63 characters Configure wireless LAN MAC filter Wlan macfilter --mode disabledallowdeny --add MACaddress Description set remote bridge MAC address Configure Wireless Bridge Wireless Distribution System/WDSDescription configure the wireless bridge Synopsis Rmac2 MACaddress Basic Show wireless LAN interface configurationsOptions --config Advance Wlan security wpaGTKRekey = Contact Information Email support@netcomm.com.au