NetComm 3G9W manual Configure basic Wireless LAN features, Options

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

Configure basic Wireless LAN features

Description: Configure basic wireless LAN features such as enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements.

Synopsis:

wlan config [--enable <01>] [--hide <01>] [--ssid <ssidStr>] [--country <countryStr>] [--isolate <01>]

[--channel <channelVal>] [--rate <rateVal>] [--mrate <rateVal>]

[--rts <rtsThreshold>] [--frag <fragThreshold>]

[--dtim <dtimInterval>] [--beacon <beaconInterval>]

[--xpress <onoff>] [--gmode <autoperformancelrs802.11b>] [--gprotect <offauto>] [--preamble <longshort>]

Options:

--enable <01>

Description: Enable or disable wireless LAN interface.

Valid value: 0 or 1

0 – disabled the wireless LAN interface.

1 – enabled the wireless LAN interface. Default value: 1

--hide <01>

Description: Hide wireless LAN network name (SSID).

Valid value: 0 or 1

0 – not hide wireless LAN SSID.

1 – hide wireless LAN SSID Default value: 0

--ssid <ssidStr>

Description: Set Wireless LAN network name (SSID).

Valid value: 32 characters string

--country <countryStr>

Description: Set Wireless LAN Country, only accept abbreviation.

Valid value: 2 or 3 characters string (AUSTRALIA is abbreviated to AU).

YML902 – 75