Web User Interface, Default Settings | NetComm 3G9W specs

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

Web User Interface

This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer (version 5.0 or later).

3.1Default Settings

The following are the default settings for the device.

•Local (LAN) access (username: admin, password: admin)

•Remote (WAN) access (username: support, password: support)

•User access (username: user, password: user)

•LAN IP address: 192.168.1.1

•WAN IP address: none

•Remote WAN access: disabled

•NAT and firewall: enabled

•Dynamic Host Configuration Protocol (DHCP) server on LAN interface: enabled

Technical Note:

During power on, the device initializes all settings to default values. It will then read the configuration profile from the permanent storage section of flash memory. The default attributes are overwritten when identical attributes with different values are configured. The configuration profile in permanent storage can be created via the web user interface or telnet user interface, or other management protocols. The factory default configuration can be restored either by pushing the reset button for more than five seconds until the power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore DefaultSettings screen.

YML902 – 13

Image 13

NetComm 3G9W manual Web User Interface, Default Settings

Contents

3G9W Hspa 7.2 Mbps Wi-Fi Router Preface Important Notice and Safety Precaution Table of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Package Contents Features Color Mode Description LED IndicatorsGreen Power on Off Power off LAN 1~4 Powered off Rear Panel Rear panel contains the ports for data and power connections Quick Setup Setup Procedure Quick SetupConfigure the router through the Web User Interface WUI Save the router configuration and reboot see section Web User Interface Web User Interface Default Settings Dhcp Mode TCP/IP SettingsClick OK to submit the settings To login to the web interface, follow the steps below Login Procedure Basic / Home Web User Interface Homepage Fields Description Following table provides further details 3G Settings 3G Service Setup 3G SettingsThis menu includes 3G service Setup and PIN Configuration 21 for instruction on how to fix this PIN Code Protection PIN ConfigurationPIN Lock Off YML902 PIN Code Change Wireless Wireless Option Description Setup Security Click Save/Apply to configure the wireless security options Authentication Card. If the Ssid does not match, access is deniedWEP Encryption will also be enabled Select Ssid Configuration Default is disabled Broadcast and multicast messages. The default isAP Isolation Point can be linked 802.11b only mode 54g ModeMbit/s Dsss specification as described in Ieee Std 54g Protection MAC Filter Deny Rejects access for the specified MAC addressesMAC Address Can be added Click Save/Apply to implement new configuration settings Wireless BridgeFeature Options Station Info Authorized Lists those devices with authorized accessIs generated randomly Associated Management Management Device Settings Restore Default Update Settings Default screen upon successful installation Access Control YML902 Simple Network Time Protocol Sntp Save and Reboot Advanced Setup This chapter explains advanced setup for your Router Advanced Setup Local Area Network LAN Configuration ProtocolIgmp Snooping No client subscribes to a multicast group Port Forwarding Network Address Translation NAT Selected the port ranges are automatically configured Is selected the port ranges are automatically configuredOptions Description External Port End Port Triggering Trigger Port End Demilitarized DMZ HostTrigger Protocol TCP, TCP/UDP or UDP Open Port Start Open Port End Security Options Description User Name User-defined label for this restriction Parental ControlMAC address of the PC running the browser Routing YML902 YML902 Domain Name Servers DNS DNS Server Configuration Options Descriptions Dynamic DNS Status Status Test Description Diagnostics System Log Click View System Log. The results are displayed as follows 3G Status Status Description Status Status BCS Battery Charge LevelQuality Ec/Io Strongest cells Network Registration Interface Shows connection interfaces Statistics Service Shows the service type Select Route to display the paths the Router has found RouteField Description But may be needed by routing daemons ARP Dynamic Host Configuration Protocol DhcpClick ARP to display the ARP information Click Dhcp to display the Dhcp information CLI commands Via Telnet Show all CLI commands CLI commands via Telnet Radio Signal Strength Reset/reboot deviceEnd the telnet session Connection status Radio Band Imsi & Imei read Wireless LAN mode set and read Options Configure basic Wireless LAN features Means auto select channel. Default value YML902 Example Configure wireless LAN security Valid value string of 79 characters Valid value string of 8 ~ 63 characters Wlan macfilter --mode disabledallowdeny --add MACaddress Configure wireless LAN MAC filter Description configure the wireless bridge Synopsis Configure Wireless Bridge Wireless Distribution System/WDSDescription set remote bridge MAC address Rmac2 MACaddress Options --config Show wireless LAN interface configurationsBasic Advance Wlan security wpaGTKRekey = Email support@netcomm.com.au Contact Information