2.Attach two Round Base Pads (57) and an Extension Leg Pad (61) to the Upright Base (69) and Extension Leg (63) with four 1" Tek Screws (39) as shown.
3.Attach a Wheel (66) to the Upright Base (69) with a Wheel Bolt (64) and a Nut (13) as shown. Do not over- tighten the Wheel Bolt; the Wheel should turn freely.
With the help of a second person, carefully tip the tread- mill onto its other side.
4.Partially fold the Frame (86) so the treadmill is more sta- ble. Do not fully fold the treadmill until it is com- pletely assembled.
Hold the Left Upright (7) against the Upright Base (69). Start a 3" Upright Bolt (21) and a 1" Upright Bolt (76) with 5/16" Star Washers (95) into the Upright Base and the Left Upright as shown. Do not tighten the Bolts yet.
2 |
|
|
|
|
| 57 |
|
|
| 69 |
|
| 63 |
|
|
|
|
| 39 |
|
| 39 |
|
| 61 | 39 |
|
|
|
| |
3 |
|
| 64 |
|
|
| |
|
| 69 | 66 |
|
|
| |
|
|
| 13 |
4 |
|
69 | 7 |
| |
21 |
|
76 | 95 |
| 86 |
7
