HOW TO USE A DISTANCE PROGRAM
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2 Select a Distance program.
To select a Distance program, press the Distance Programs (DISTANCE PGMS) button repeatedly until 2K, 5K, 7K, or 10K appears in the matrix.
When a Distance program is selected, the maxi- mum speed setting of the program will flash in the display for a few seconds.
3 Press the Start button to start the program.
A moment after the button is pressed, the walking belt will begin to move at 3 mph. Hold the handrails and begin walking.
Near the end of the first minute of the program, the speed setting will flash in the display and a se- ries of tones will sound. The speed of the walking belt will then increase.
Near the end of the second minute of the pro- gram, the speed setting will flash in the display and a series of tones will sound. The speed of the walking belt will then increase.
Note: To change the speed of the walking belt or the incline of the treadmill at any time during the program, press the Speed or Incline buttons.
The priority display will show the number of kilo- meters still to be run. When you have almost reached the distance goal, the lower right corner of the display will flash and a series of tones will sound.
To stop the program at any time, press the Stop button. To restart the program, press the Start but- ton. The walking belt will begin to move at 1 mph. Adjust the speed of the walking belt as desired by pressing the Speed Control increase or decrease button or one of the numbered Speed buttons.
When you have completed a Distance program, your total time will flash in the lower left corner of the display. The console will then start a preset
Follow your progress with the displays and the
4 Workout Intensity bar.
See step 6 on page 15.
5 Measure your heart rate if desired.
See step 7 on page 15.
6 Turn on the fans if desired.
See step 8 on page 16.
When you are finished exercising, remove the
7 key from the console.
See step 7 on page 17.
18
