If the speed or incline settings are too high or too low, you can manually override the settings by pressing the Speed or Incline buttons on the con- sole. However, when the next "chirp" is heard, the speed and/or incline will change to the next settings of the CD or video program.
To stop the walking belt at any time, press the Stop button on the console. The time will begin to flash in the Pace/Time display. To restart the pro- gram, press the Start button or the Speed in- crease button. After a moment, the walking belt will begin to move at 1 mph. When the next "chirp" is heard, the speed and incline will change to the next settings of the CD or video
program.
When the CD or video program is completed, the walking belt will stop and the time will begin to flash in the Pace/Time display. Note: To use another CD or video program, press the Stop button or re- move the key and go to step 1 on page 20.
Note: If the speed or incline of the treadmill does not change when a "chirp" is heard:
•Make sure that the indicator on the iFIT.com
button is lit and that the time is not flashing in the Pace/Time display. If the Pace/Time dis- play is flashing, press the Start button or the
Speed increase button on the console.
•Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con- sole may not detect the program signals.
•Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.
•If you are using your portable CD player and the CD skips, set the CD player on the floor or another fiat surface instead of on the console.
_'q_Follow your progress with the LED track and the displays.
See step 5 on page 10.
r_ Measure your heart rate if desired.
See step 6 on page 11.
BTurn on the fan if desired. See step 7 on page 11.
When you are finished exercising, remove the key from the console.
See step 7 on page 13.
CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player or VCR when you are finished using them.
21
