Healthrider HTL93940 Select one Custom programs, Press the Start button Or the Speed Increase

HOW TO CREATE CUSTOM PROGRAMS					in the matrix.) To program a speed setting and an
					incline setting for the first segment, simply adjust
					the speed and incline of the treadmill as desired
B	Insert the key into the console.				by pressing the Speed and Incline buttons. Every
					few times	one of the Speed buttons is pressed, an
	See HOW TO TURN ON THE POWER			on page	additional	indicator will light or darken in the
	10.				Current Segment		column.
B Select one of the		custom programs.			During the last three seconds of the first segment,
					both the Current		Segment column and the column
	To select a custom	pro-			to the right will flash, a series of tones will sound,
	gram, press the Custom				and the Speed display and the Distance/Incline
	Program 1 button or the				display will flash. When the first segment ends, the
	Custom Program 2 but-				current speed setting and the current incline set-
	ton. The indicator on the				ting will be saved		in memory, and all speed set-
	button that you press will				tings in the matrix		will move one column to the left.
	light.				The speed	setting for the second segment will
					then be shown in the flashing Current Segment
_1	Press the Start button		or the Speed	increase	column. Program a speed setting and an incline
					setting for the second segment as described
	button and program the desired speed and in-				above.
	cline settings.
	A moment after the button is pressed, the walking				Continue programming speed and incline settings
					for as many segments as desired; custom pro-
	belt will begin to move. Hold the handrails and
					grams can have up to forty segments. When you
	begin walking.
					are finished with your workout, press the Stop but-
	Refer to the matrix.				ton twice. The speed and incline settings that you
	Each custom program is		Current	Segment	have programmed and the number of segments
					that you have programmed will then be saved in
	divided into one-minute
	segments. One speed				memory.
	setting and one incline
	setting can be pro-			B	hen the	program is finished, remove the key.
	grammed for each seg-
					See step 7 on page 13.
	ment. The speed setting
	for the first segment will
	be shown in the flashing Current Segment column
	of the matrix. (The incline settings are not shown

16