
Setting the Date and Time
When the power is turned on for the first time, the date/time setting screen appears.
1 Press the ADJ./OK button !"#$ to set the year, month, date, time and format.
•Change the setting with !" and move the item with #$.
•You can cancel the setting by pressing the DISP. button.
Cancel
Setting at shipping
If you are using the camera for the
Cancel
2 Check the display and then press the ADJ./OK button.
• The confirmation screen appears.
3 Press the ADJ./OK button.
• The date and time are set.
Note
•If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.
•To retain the date and time settings, load a battery with adequate remaining power for more than two hours.
•The set date and time can be changed later. (GP.188)
•The date and time can be inserted into images. (GP.119)
first time, read this section.
33