Samsung CX1 manual Set Set Fn Button to AF/Snap on the setup menu

2

Using the Fn (Function) Button

Locking the focus at the focus lock position --------------------------------------

You can press the Fn button to switch AF/MF and lock the focus at the focus lock position (AF Lock). Use the following operating procedure.

1With the camera set to auto focus, half-press the shutter release button to focus on the subject. (Focus Lock)

2Release the shutter release button and press the Fn button.

•The camera is set to MF and the shooting distance is fixed at the focus lock position.

•To return to auto focus mode, press the Fn button again.

AF/Snap

Assigning [AF/Snap] to the Fn (Function) button (GP.169) and then pressing the Fn button during shooting allows you to switch between auto focus (AF) and Snap. Pressing the Fn button switches the focus mode depending on the [Focus] setting on the shooting menu (GP.99), as shown below.

[Focus] setting	Press the Fn button
Multi AF	Switches between [Snap] and [Multi AF].
Spot AF	Switches between [Snap] and [Spot AF].
Snap	Switches between [Multi AF]*/[Spot AF]* and [Snap].

* The last selected AF mode is selected.

1Set [Set Fn Button] to [AF/Snap] on the setup menu.

• For the operating procedure, see P.169.

2 With the camera ready to shoot, press the Fn button.

• When the focus mode changes to snap mode, the symbol appears at the upper right of the screen.

Caution------------------------------------------------------------------------------------------

When [Focus] is set to [Multi-trgt AF], [MF] or [A] (GP.99), pressing the Fn button does not switch between AF and Snap.

Note ----------------------------------------------------------------------------------------------

You can also use the shooting menu to make the [Focus] setting. (GP.99)

72