Example of the display in Windows XP
3Connect the USB cable to the USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a file necessary for recognizing the camera as a drive.
•After this preparation, the camera is displayed as a drive under [My Computer].
4From the displayed drive,
copy a file to the desired location.
• The figure at right shows the folder configuration in the drive.
•When the contents of the internal memory are displayed, the drive name is [RICOHDCI].
Example of the display in
Windows XP
•Do not turn off the camera or disconnect the USB cable during image transfer.
•If a file with the same name already exists at the destination, it is overwritten. If you do not want the file to be overwritten, transfer data to another folder, or change the file name of the file at the destination.
Note
When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal memory are displayed.
Downloading Images to Your Computer
9