File Name Settings
When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned.
When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.
Available Settings | Description |
On (Continue numbering) | File names are automatically assigned to still images you take, |
| in the format of “R” followed by seven digits, from R0010001.jpg |
| to R9999999.jpg. |
| With this setting, file numbering is continued even when the SD |
| memory card is exchanged. |
Off (Do not continue | File numbering is assigned, from RIMG0001.jpg to |
numbering) | RIMG9999.jpg, for each SD memory card. |
*Default setting | When the file name reaches RIMG9999, no more data can be |
| recorded to that card. |
1Display the setup menu.
• For the operating procedure, see P.161.
2Press the ADJ./OK button " to select [Card Sequence No.] and press the button $.
3Press the button !" to select the desired setting.
4Press the ADJ./OK button.
Note
•When data is recorded to the internal memory, files are assigned consecutively numbered file names, just as if [Card Sequence No.] is set to [Off].
•When images are transferred to a computer using
When the file name reaches RIMG9999 or R9999999, no more files can be saved. In this case, move image data from the SD memory card to the memory of the computer or a storage medium, and then format the SD memory card.
7
