Healthrider HTL93940 manual

To stop the program at any time, press the Stop button. The time will begin to flash in the Pace/Time display. To restart the program, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

Dollow your progress with the displays. See step 5 on page 10.

_'.'Measure your heart rate if desired.

See step 6 on page 11.

r_Turn on the fan if desired.

See step 7 on page 11.

Bhen you are finished exercising, remove the key from the console.

When the program has ended, make sure that the incline of the treadmill is at the lowest set-

ting. Next, remove the key from the console and put it in a secure place. Note: If the displays and various indicators on the console remain lit

after the key is removed, the console is in the "demo" mode. See page 23 and turn off the demo mode.

When you are finished using the treadmill, move the reset/off circuit breaker to the off position and unplug the power cord.

13