Hearth and Home Technologies 9100, 7100 manual Installation Clearances, 30 1/4, 768 mm, 457 mm

Installation Clearances

If the range must stand beside a refrigerator, it is important for proper air circulation, that there be at least 5" of space between the two appliances.

Do not install range closer than 1/2" from adjacent surfaces.

To eliminate the risk of burns or fire by reaching over heated surface units, installation of cabinet storage space above the surface units should be avoided. If there is existing cabinet storage space have at least 30" of clearance. (see fig 3)

For best cooking results, your range should be level. This can be checked with a carpenter’s level on top of the cooking surface and across the oven rack. If levelling is required, adjust the leveller screws under one or more of the legs (see "Positioning the Range" step 4).

0

		min
	30 1/4"					min	18"
	768 mm			0
			0		457		mm
		max
36 "
		914 mm

min

30 1/4"

768 mm

1"

25 mm

min

36 "

914 mm

0

	min 18"
0	457 mm

Model 9100 Installation Clearance

Model 7100 Installation Clearance

Fig 3 Installation Clearances

The clearances in the table are also stated on the rating plate and on a reproduction of the plate on the back page of this manual. (see "installation clearances" diagram Fig. 3)

Installation Clearances

Surface adjacent to cook top-left (7100)	1” (25mm)
Surface adjacent to cook top-right (7100)	0” (0 mm)
Surface adjacent to cook top (9100)	0” (0 mm)
Surface adjacent to warming oven	0” (0 mm)

Cook top to underside of adjacent cabinets ... 18” (457 mm)

Cook top to underside of cabinets	30 1/4” (768 mm)
Maximum depth of overhead cabinets	13” (330 mm)
Maximum depth of counters	24” (610 mm)
Maximum height of counters	36” (914 mm)
Rear clearance	0” (0 mm)

5