Installation

 

 

Outside Air

 

 

To install outside air, use 2 3/4” I.D.galvanized

 

 

steel flex pipe, part # 2-00-08544 ( 12’6” length) or part

 

 

# 2-00-08545 ( 25’ length) See Fig. 6. There is a break-

 

 

away hole on the rear panel which must be removed

 

 

before connecting the flex pipe. See Fig. 7.

 

 

When the appliance is side wall vented: The air

 

 

intake is best located on the same exterior wall as the

 

 

exhaust vent outlet, and located lower on the wall than

 

 

the vent outlet.

 

 

When the appliance is roof vented: The air intake

Inlet Cover part#

Fig. 6

is best located on the exterior wall oriented toward the

1-10-09542

prevailing wind direction during the heating season.

 

 

Never terminate the outside air above the vent pipe

 

 

outlet. The maximum length of this pipe is 20 feet. Inlet

 

 

cover part number 1-10-09542 should be used to keep

 

 

birds, rodents etc.out of the inlet pipe. See Fig.6.

 

 

NOTE: The inlet cover should not be placed in an

Outside Air Pipe

 

area where drifting of snow or ice will build up, block-

 

ing the intake air supply.

Knockout

 

 

 

The Outside Air knockout is located on the face of

 

 

the Feeder Cover. It is pre-cut except for several small

Feeder Cover

 

tabs. There is also a filler plate screwed to the inside

 

 

to cover the top of the hole after the Outside Air Pipe

 

 

has been installed. This will allow for removal of the

 

 

Feeder Cover without disconnecting the Outside Air

 

 

Pipe. See Fig. 7.

Fig. 7

 

Only metal Intake Flex should be used for the

 

Outside Air Supply connection.

 

 

 

 

The Outside Air Intake Pipe is inside the Feeder

 

 

Cover and to the right of the feeder motor. The 2 3/4”

 

 

steel flex pipe is made to slide over the outside of the

 

 

Air Intake Pipe. See Fig. 8. It should be held into place

 

 

with some silicone, foil tape, or a hose clamp. (not

Outside Air Inlet Pipe

 

supplied)

 

Heat Reclaiming Ventilation System (HRV)

 

When installing in a house with a Heat Reclaim-

 

ing Ventilation System (HRV) be sure the system is

 

balanced and is not creating a negative pressure in the

Hopper/Feeder

house.

Swing Plate

 

Knob

 

13

Fig. 8

Page 12 Page 14
Page 13
Image 13
Hearth and Home Technologies BH 105 manual Outside Air
Page 12 Page 14

BH 105 specifications

Hearth and Home Technologies BH 105 is a modern and versatile fireplace that combines functionality and aesthetic appeal. Designed for both residential and commercial spaces, it brings the warmth of a traditional fireplace with the convenience of contemporary technology. One of the standout features of the BH 105 is its impressive heating capacity, efficiently warming larger areas while maintaining a cozy atmosphere.

The BH 105 uses advanced combustion technology, which not only maximizes heat output but also minimizes emissions, making it an eco-friendly choice for homeowners. This fireplace achieves a commendable efficiency rating, ensuring that most of the heat generated is utilized effectively, reducing energy costs and environmental impact.

Aesthetically, the BH 105 offers a sleek and contemporary design that can seamlessly blend with any decor. The large viewing area features tempered glass, providing unobstructed views of the mesmerizing flames. This visual aspect enhances the ambiance of any room, making it a focal point in the home. The fireplace is available in various finishes, allowing homeowners to choose a style that complements their personal taste and existing interior designs.

User experience is a priority in the BH 105’s design. It includes features such as an easy-to-use control panel and a programmable thermostat that allows for precise temperature regulation. This user-friendly interface enables individuals to set their desired comfort levels with ease.

The BH 105 also comes equipped with safety features like an automatic shut-off system, ensuring peace of mind for users, especially in households with children or pets. The durability of the materials used in its construction ensures that the fireplace can withstand the rigors of regular use while maintaining its aesthetic charm.

In summary, Hearth and Home Technologies BH 105 is a perfect embodiment of modern fireplace technology, offering high efficiency, stunning design, and user-friendly features. Whether for heating a living room or creating a cozy atmosphere in a commercial setting, the BH 105 stands out as an exceptional choice for discerning individuals seeking warmth without compromising on style.
Top Page Image Contents