9 Gas Information

A. Fuel Conversion

C. Gas Connection

Before making gas connections ensure appliance being in- stalled is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a quali- fied technician using Hearth & Home Technologies specified and approved parts.

B. Gas Pressure

Proper input pressures are required for optimum appliance performance. Gas line sizing requirements need to be made following NFPA51.

WARNING

Fire Risk

Explosion Risk

High pressure will damage valve.

•Disconnect gas supply piping BEFORE pressure testing gas line at test pressures above 1/2 psig.

•Close the manual shutoff valve BEFORE pressure testing gas line at test pressures equal to or less than 1/2 psig.

Note: Have the gas supply line installed in accordance with local building codes, if any. If not, follow ANSI 223.1. Installation should be done by a qualified installer approved and/or licensed as required by the locality. (In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter.)

Note: A listed (and Commonwealth of Massachusetts approved) 1/2 in. (13 mm) T-handle manual shut-off valve and flexible gas connector are connected to the 1/2 in. (13 mm) control valve inlet.

•If substituting for these components, please consult local codes for compliance.

Refer to Reference Section 16 for location of gas line access in appliance.

Note: Gas line may be run from either side of appliance using one of the knockouts provided. Hole in outer shell NOT to exceed 2-1/2 in. and should never penetrate the firebox.

WARNING

Fire Risk

Explosion Risk

Verify inlet pressures.

•High pressure may cause overfire condition.

•Low pressure may cause explosion.

•Verify minimum pressures when other household gas appliances are operating.

Install regulator upstream of valve if line pressure is greater than 1/2 psig.

Pressure requirements for appliance are shown in table be- low. Minimum pressures must be met when other household gas appliances are operating.

Pressure

Natural Gas

Propane

Minimum Inlet Pressure

5.0 in. w.c.

11.0 in. w.c.

Maximum Inlet Pressure

7.0 in. w.c.

14.0 in. w.c.

Manifold Pressure

3.5 in. w.c.

10.0 in. w.c.

WARNING

Gas Leak Risk

•Support control when attaching pipe to prevent bending gas line.

Note: The gap between supply piping and gas access hole may be caulked with high temperature caulk or stuffed with non-combustible, unfaced insulation to prevent cold air infiltration.

•Ensure that gas line does not come in contact with outer wrap of appliance. Follow local codes.

•Incoming gas line should be piped into the valve compartment and connected to the 1/2 in. connection on the manual shut-off valve.

Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07

19

Page 18 Page 20
Page 19
Image 19
Hearth and Home Technologies RBV4842IT Gas Information, Fuel Conversion Gas Connection, Gas Pressure, Gas Leak Risk
Page 18 Page 20

RBV4236IT, RBV4842IT, RBV4842IH, RBV4236IH specifications

Hearth and Home Technologies has consistently combined aesthetic elegance with advanced technology in their range of contemporary fireplaces. Among their notable products are the RBV4236IH, RBV4842IH, RBV4842IT, and RBV4236IT models, each designed to enhance the ambiance of any living space while providing optimal heating solutions.

The RBV4236IH is a 36-inch gas fireplace that exemplifies innovative design. This model is available in both direct vent and vent-free options, allowing users flexibility based on their installation needs. Its clean-face design provides a wide, unobstructed view of the flames, making it a captivating focal point in any room. Moreover, it features a modulating flame system that delivers consistent warmth while allowing users to customize the flame size for varying mood settings.

Moving to the RBV4842IH, this 42-inch model takes efficiency to new heights. It boasts an impressive heating capacity, suitable for larger spaces, and includes advanced flame technology that ensures realistic and visually striking flames. The RBV4842IH is equipped with adjustable media options, including glass and logs, providing versatility in styling to suit individual preferences.

The RBV4842IT offers similar dimensions and features to the RBV4842IH, but it focuses on ease of installation and maintenance. With an innovative installation kit and design, homeowners can set up this fireplace with minimal hassle. It also incorporates a state-of-the-art ignition system, allowing for reliable starts every time, even during colder months.

Lastly, the RBV4236IT, also a 36-inch option, is tailored for versatile installations, including both residential and commercial spaces. It integrates high-efficiency heating technology that maximizes warmth while minimally impacting energy costs. Additionally, its user-friendly remote control provides ease in operation, making it simple to adjust settings without leaving the comfort of your seat.

In summary, Hearth and Home Technologies' RBV series represents a perfect blend of style, efficiency, and innovation. With thoughtfully designed features, including customizable flame settings, adjustable media, and smart ignition systems, these models cater to a wide audience, ensuring that both aesthetics and heating needs are met with excellence. Whether you're in search of a contemporary centerpiece for your home or an efficient heating solution, the RBV4236IH, RBV4842IH, RBV4842IT, and RBV4236IT models stand out as premier choices.
Top Page Image Contents