Heat & Glo LifeStyle 8000TRD Flue Restrictor Instructions, Vertical Venting, MAX .4 M, Break Here

Flue Restrictor Instructions

1.Remove Exhaust Shield using a 1/4” nut driver by removing the four screws securing it in place (see Figure 7).

STRAIGHT UP

VERTICAL VENTING

V (FT.)

40' MAX. (12.4 M)

Figure 6. Straight Up Vertical Venting

NOTE: On vertical venting configurations you may want to install the vertical baffle (385-128). See flue restrictor in- stallation instructions.

EXHAUST

SHIELD

FLUE

RESTRICTOR

Figure 7

2.Break the Flue Restrictor into two pieces. Do this by bending the part back and forth until it breaks (see Figure 8).

BREAK

HERE

Figure 8. Flue Restrictor

13