Step 10. Installing Trim, Logs, and Ember Material

Installing the Trim

Combustible materials may be brought up to the specified clearances on the side and top front edges of the fireplace, but MUST NEVER overlap onto the front face. The joints between the finished wall and the fireplace top and sides can only be sealed with a 300° F. (149° C) minimum sealant.

!WARNING: WHEN FINISHING THE FIREPLACE, NEVER OBSTRUCT OR MODIFY THE AIR IN- LET/OUTLET GRILLES IN ANY MANNER.

Install optional marble and brass trim surround kits as desired. Marble, brass, brick, tile, or other non-combustible materials can be used to cover up the gap between the sheet rock and the fireplace.

EMBER

MATERIAL

INCORRECT

EMBER PLACEMENT

PILOT

ASSEMBLY

FIRST

GRATE BAR

DO NOT PLACE EMBER MATERIAL ON FIRST SECTION OF PORTS

FROM THE PILOT TO

CORRECT THE FIRST GRATE BAR. EMBER

PLACEMENT

Do not obstruct or modify the air inlet/outlet grilles. When overlapping on both sides, leave enough space so that the bottom grille can be raised and the trim door removed.

Positioning the Logs

The gas logs have been factory installed and they should not need to be positioned.

If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.

Placing the Ember Material

Ember material is shipped with this gas fireplace. The bag labeled Golden Embers (GE-93) is flame colorant material. The bag labeled Glowing Ember (050-721) is standard glowing ember material.

To place the ember material:

•Remove the wing nuts, glass clips and spring clips around the glass door.

•Remove the glass door from the unit.

•Ember material is to be placed on the burner with cau- tion. NOTE: Do NOT place ember material over burner port holes. Place only dime size pieces along outer edges of port trails. This bag is sized for (4) ember ap- plications. Follow Figure 34 for correct placement. Fail- ure to apply ember material as directed could result in poor lighting conditions and sooting problems. After plac- ing ember material sprinkle GE-93 on top of the burner.

•Save the remaining ember materials for use during fire- place servicing.

•Replace the wing nut, glass clips and spring clips.

•Optional mesh (see Figure 35).

Figure 34. Placement of Ember Material

MESH

CLIP

Figure 35.

If using the optional mesh doors, attach to fireplace glass doors using the mesh clips provided in your manual bag, as shown.

CAUTION: IT IS STRONGLY RECOMMENDED THAT TRIM DOORS WITH OPTIONAL MESH SCREENS BE INSTALLED ON PROPANE MODELS.

•Replace the glass door and a front trim door on the unit (see Parts List Section of this manual.)

•Hand tighten the wing nuts.

30

Page 29 Page 31
Page 30
Image 30
Heat & Glo LifeStyle BAY-38HV manual Installing Trim, Logs, and Ember Material, Installing the Trim, Positioning the Logs
Page 29 Page 31

BAY-38HV specifications

The Heat & Glo LifeStyle BAY-38HV is a cutting-edge gas fireplace designed to enhance the ambience of any home while providing efficiency and convenience. This innovative unit combines modern aesthetics with advanced technology, making it a popular choice among homeowners seeking both form and function in their heating solutions.

One of the standout features of the BAY-38HV is its sleek, contemporary design, which allows it to seamlessly integrate into various interior styles. With its clean lines and expansive viewing area, the fireplace creates a focal point in any room, offering a warm and inviting atmosphere. The heat-resistant glass front provides a clear view of the flames, ensuring that the beauty of the fire can be enjoyed from multiple angles.

In terms of technology, the BAY-38HV is equipped with the latest in gas fireplace innovations. It incorporates an advanced IntelliFire ignition system, allowing for easy operation with the simple push of a button. Users can control the flame height and heat output directly from a remote, providing complete convenience and customizability. This makes it an excellent option for those who want to adjust the ambiance of their space effortlessly.

Efficiency is another key characteristic of the BAY-38HV. The fireplace boasts a high efficiency rating, ensuring that the warmth generated is maximized while minimizing energy consumption. This efficient performance not only contributes to a more comfortable home but also helps in reducing heating costs, making it an environmentally friendly choice.

The BAY-38HV also features an array of customizable options, including various log styles and ember bed choices. This allows homeowners to tailor the appearance of their fireplace to suit their individual preferences. Additionally, its compatibility with zone heating systems offers an effective solution for those looking to heat specific areas of their home without relying on central heating.

Safety is paramount with the Heat & Glo LifeStyle BAY-38HV. It includes protective features such as a safety screen and automatic shut-off mechanisms, providing peace of mind for families and individuals.

In summary, the Heat & Glo LifeStyle BAY-38HV gas fireplace is an exemplary model that combines stylish design with advanced technology. Its ease of use, efficiency, customization options, and safety features make it an ideal choice for anyone looking to enhance their living space with the charm and comfort of a gas fireplace.
Top Page Image Contents