SLP-HRC-SS

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

HORIZONTAL TERMINATION CAP 8 in.Manual background (203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

 

Max

12 in.

Effective

(305 mm)

Length

SLP-TRAP

Horizontal Termination Cap

Term Cap

Minimum

Maximum

Effective Length

Effective Length

 

 

 

 

Trap1

3-1/8 in.

4-3/4 in.

79 mm

121 mm

 

Trap2

5-1/4 in.

9-1/4 in.

 

 

133 mm

235 mm

 

8-1/8 in.

(206 mm)

15 in.

(381 mm)

13in.

(330 mm)

Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm

5-1/2 in.

8-3/8 in.

140 mm

213 mm

87° Manual backgroundManual backgroundManual background

Manual backgroundManual background 10-1/2 in.

267 mm

10-7/8 in. 276 mm

SLP-HRC-SS

SLP-HRC-ZC-SS

HORIZONTAL TERMINATION CAP

Heat & Glo • SLR32 • 2269-900 Rev. E • 4/12

65

Page 65
Image 65
Heat & Glo LifeStyle SLR32 owner manual Slp-Hrc-Ss Slp-Hrc-Zc-Ss, Horizontal Termination Cap