Heat & Glo LifeStyle st-42tvfl manual Step Positioning Leveling, and Securing the, Fireplace

Step 5

Positioning,

Leveling, and

Securing the

Fireplace

1.Place the fireplace into position.

2.Level the fireplace from side to side and from front to back.

3.Shim the fireplace with non-combustible material, such as sheet metal, as necessary.

4.Secure the fireplace to the framing by nailing or screwing.

The diagram below shows how to properly position, level, and secure the fireplace.

NAILING TABS

AT BASE OF

FIREPLACE.

Step 6

The Gas Control

Systems

Figure 8. Proper Positioning, Leveling, and

Securing of a Fireplace

!WARNING: THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Direct Spark Ignition (DSI) or Standing Pilot (Millivolt) gas control systems are used in these models.

Standing Pilot Ignition System

This system includes millivolt control valve, standing pilot, thermopile/thermocouple flame sensor, and piezo ignitor.

!WARNING

110-120 VAC MUST NEVER BE CONNECTED TO ACONTROL VALVE IN AMILLIVOLT SYSTEM.

Direct Spark Ignition (DSI) System

This system includes a 110V control valve, electronic module (with internal transformer) and spark ignitor/ flame sensor.

WARNING: CONTINUOUS 110 -120 VAC

!SERVICE MUST BE DIRECTLY WIRED TO THE FIREPLACE JUNCTION BOX IN A DSI SYSTEM.

21