Heatiator NEVO4236I NEVO3630I Appliance Setup, A. Remove the Packaging, E. Clean the Appliance

15 Appliance Setup

A. Remove the Packaging

Remove the shrink film, corrugated top cap, bottom cap and column protectors from the appliance. The appliance should look as shown in Figure 15.1.

Figure 15.1 Appliance Unwrapped

•Pull the four glass assembly latches out of the groove on the glass frame. Refer to Figure 15.2.

•Remove the glass assembly from the appliance.

Latches
(both bottom
and top)
Glass
Assembly
Figure 15.2	Glass Assembly

D. Remove Glass Media Package

The glass media package is shipped inside the firebox. Refer to Figure 15.1.

B. Remove the Shipping Materials

Remove the shipping materials from inside and under- neath the firebox.

C. Removing Fixed Glass Assembly

WARNING! Risk of Asphyxiation! Handle fixed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.

DO NOT:

•Strike, slam or scratch glass

•Operate fireplace with glass removed, cracked, broken or scratched.

Replace fixed glass assembly as a complete assembly.

E. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.

F. Accessories

Install approved accessories per instructions included with the accessories. Refer to Section 17.

WARNING! Rick of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazad and will void the warranty.

56 Heatilator • Evolution • 4065-114 Rev. o • 11/11