Heatiator NEVO4236I NEVO3630I B. Vent Components Diagrams continued, Optional Wire Harness

B. Vent Components Diagrams (continued)

	13-5/8 IN.
EFFECTIVE LENGTH	346 mm
32 IN. (813 mm) MIN.
35 IN. (889 mm) MAX.

12-1/2 IN.

318 mm

20-3/4 IN.

527 mm

Optional Wire Harness

DESCRIPTION	PART NUMBER
10 ft. PV Wire Harness	PVI-WH10
20 ft. PV Wire Harness	PVI-WH20
40 ft. PV Wire Harness	PVI-WH40
60 ft. PV Wire Harness	PVI-WH60
80 ft. PV Wire Harness	PVI-WH80
100 ft. PV Wire Harness	PVI-WH100

PVI-SLP

Power Vent Inline

Note: Wire harnesses required to power the PVI-SLP connect to the appliance and are ordered separately from PVI-SLP. Contact your dealer to order.

	16 IN.
406 mm
		4-1/2 IN.		15 IN.
		114 mm
			(381 mm)
9-3/16 IN.
(233 mm)

13-5/8

(346 mm)

16-11/16 IN.

424 mm

16-11/16 IN.

(424 mm)

12-1/2 IN. (318 mm)

SLP-LPC

SLP Low Profile Cap

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

15-1/8 in.

(384 mm)

12 in. (305 mm)

Figure 17.9 Vent Components

8 in.

(203 mm) Heat Shield

			Term Cap		Minimum		Maximum
				Effective Length			Effective Length
			Trap1			3 1/8 in.	4 3/4 in.
						79 mm	121 mm
		Max
			Trap2			5 1/4 in.	9 1/4 in.
Effective
						133 mm	235 mm
	Length

SLP-TRAP

Horizontal Termination Cap

Heatilator • Evolution • 4065-114 Rev. o • 11/11 69