High End Systems AF1000 user manual 3. System Cabling, 4. Audio Cabling

Connect an XLR cable to the rear of the Mini Controller and run it to the first AF1000. Daisy chain the desired number of fixtures together. Refer to Figure 1.3.

Note: fixture termination is not required.

Figure 1.3. System Cabling

1

	AF1000
	12
OUT	IN

AF1000	AF1000
2	1

OUT	IN	OUT	IN	Mini
				Controller

If you intend on using the audio synchronization, connect a 1/4-inch mono male (tip, ring) phone connector or 1/4-inch stereo male (tip, ring, sleeve) phone connector to the Audio input jack on the rear of the connector. Refer to Figure 1.4 for correct cable wiring.

Figure 1.4. Audio Cabling

Chapter 1 Installation and Setup 1-5