High End Systems AF1000 Mini Controller AC power cable, disables controller output of programs

1.	<STANDBY>	disables controller output of programs
2.	<flash>	when held down, causes all connected
		strobes to flash at full intensity for .15
		seconds at 50 Hz. and .125 seconds at 60
		Hz.
3.	Up/down arrow keys	increments values up/down
4.	<program>	provides access to current program,
		Program Advance Mode, and Program
		Hold Mode
5.	<rate>	provides access to the Rate parameters
6.	<intensity>	provides access to the Intensity
		parameters
7.	<audio>	provides access to the audio parameters
8.	Value display	displays the current value or mode via
		two 7-segment LEDs
9.	Program hold indicator LED	when lit, Program Hold Mode is in use
10.	Audio beat indicator LED	indicates that an audio signal is present,
		the rate of the beat, and the strength of
		the audio signal
11.	Output channel display LEDs	indicates the intensity and operation of
		the applicable channels
12.	Configuration DIP switches	selects the number of output channels
13.	Data Link Out	3-pin female XLR connector that
		provides serial DMX data to the
		strobes
14.	Audio Input	1/4-inch stereo input jack
15.	Line cord	Mini Controller AC power cable

Introduction Intro-5