High End Systems AF1000 Program Hold, Program Select Return, Standard Programs, Number of

Program Hold

Program Hold allows another program to be selected without affecting the current program being run. Program Hold is initiated by holding down the <program> key and using the arrow keys to pre-select another program. The Program Hold Indicator (LED between the 7-segment LEDs in the value display) will illuminate to confirm this mode is active. The next program will not begin until the <program> key is released.

Program Select Return

Twelve seconds after adjusting the Rate, Intensity, or Audio setting, the controller will return to Program Mode. Any changes made to the above settings will be in effect.

Standard Programs

The number of Standard Programs the Mini Controller can use depends on the number of channels that are set up. Refer to Table 2.1.

Table 2.1: Standard Programs Per Channel

Number of	Number of
Channels	Programs
1	6
2	12
3	24
4	23
5	27
6	27
7	27
8	27
9	27
10	27
11	27
12	27

2

Chapter 2 Mini Controller Operation 2-3