Audio Mode
The Audio feature allows audio triggering and synchronization control of the AF1000 strobes. Press the <audio> key and use the arrow keys to maneuver through the audio parameters.
Note: if any of the following parameters are selected, Audio Mode will disable itself (- - ) so it will not to conflict with any actions of these parameters:
•Advance Programs ( A 1 through A 8 ) in Program Mode.
•Program Function in Rate Mode and Intensity Mode.
•Function Advance in Rate or Intensity Mode.
Audio Parameters
There are five sets of audio parameters. Refer to Figure 2.1 and the Addendum for clarification of Audio parameters.
Figure 2.1. Audio Parameter Display
2
Audio disabled (off)
No program advancement
Program advancement every four beats
Program advancement every beat
1 through 9 depicts the manipulation of Rate of Intensity function
0through 9 depicts the manipulation of Rate of Intensity function
Audio Advance
The audio settings are:
•Two side by side horizontal bars– the Audio Mode is disabled and Audio Rate or Intensity functions are not available (default).
•One horizontal bar– no program advancement, but the audio rate or intensity manipulation functions are available (refer to the following section).
•Two horizontal bars– programs will advance randomly with every four beats.
•Three horizontal bars– programs will advance randomly with every beat.
•Audio Advance ( A A )– programs will randomly advance to a different Audio Mode every eight seconds.
Chapter 2 Mini Controller Operation
