High End Systems SHOWGUN user manual Level, Following sensors

CHAPTER 3 SHOWGUN® Menu System

Level 1

INFOMATION MENU

Level 2	Option/Setting		Description/Notes
DMX VALUES	1:### ### ###		Displays current values for all channels in
MENU	4:### ### ###		groups of six DMX values/screen
	CURRENT		After selecting CURRENT, MAXIMUM or MINIMUM,
			you can view the temperature for the
			following sensors:
	MAXIMUM
			TOPBOX: ###C
TEMPERATURES			HEAD 1: ###C
MENU	MINIMUM		LED TRACKING:
			###C
	TEMP RESET		Default setting is NO. Select YES and press
			Enter for 5 seconds to reset all sensors to
			Current Temperature
FIXTURE HOURS:			Displays fixture operation time in
			hours:minutes
FIXTURE HOURS	NO		Default “safe” setting
			Press Enter for 5 seconds to reset fixture
RESET:	YES
			hours to 0
LAMP HOURS:			Displays lamp operation time in
			hours:minutes
LAMP STRIKES:			Displays current number of lamp strikes
LAMP HR/STRIKE	NO		Default “safe” setting
			Press Enter for 5 seconds to reset fixture
RESET: ###	YES
			hours to 0
	LAMP OFF
LAMP STATUS:	LAMP ON		Displays current lamp
	LAMP STRIKING		status
	LAMP ERROR
SOFTWARE	V ##.##.###		Major.Minor.Build
VERSION:
	PAN
	HW:#	SW:#
	TILT
	HW:#	SW:#
	SHUTTER/CYAN
	HW:#	SW:#	Displays the Hardware and Software
	MAG/YELLOW		versions for each logic board in the fixture.
MODULE VERSION	HW:#	SW:#
MENU	EDGE/GOBO/ROT
	HW:#	SW:#
	FOCUS/ZOOM/IRIS
	HW:#	SW:#
	RGB LED CONTROL
	HW:#	SW:#
	DISPLAY -		Displays NOT AVAILABLE if a board does not
	NOT AVAILABLE		exist in that position.

SHOWGUN® User Manual 17