CHAPTER 5
Maintenance and Troubleshooting
Reflector
1.Loosen two captive screws on each side to remove the two side bezels
2.Loosen four captive screws to remove the rear bezel
3.Using a 3 mm hex, remove the four M4 screws and slide the hot mirror mount out of the unit.
4.Slide the reflector out of the mirror mount.
5.Clean the reflector and replace.
Filter
There is a washable filter located on one side of the electronics housing attached with velcro. Remove, wash with soap and water.
Allow to dry and then reattach.
44 | SHOWGUN® User Manual |
