
CHAPTER 4
Fixture Programming
Control Settings
The Control parameter activates certain Fixture functions. To access all SHOWGUN® Control settings (except for Pan & Tilt MSpeed Off), first select a control channel value, then set the Shutter channel to “0.”
NOTE: The Control channel should not be crossfaded.
Control Setting | Description |
|
|
Safe | Disables all Control settings for normal operation. |
|
|
Pan & Tilt MSpeed Off | Sets Pan & Tilt MSpeed to ignore MSpeed settings. |
|
|
Display Off | Sets display to off. |
|
|
Display Bright | Brightens the display characters. |
|
|
Home | Remotely homes the fixture. |
|
|
Lamp On | Remotely restrikes the fixture’s lamp. |
|
|
Lamp Off | Remotely extinguishes the fixture’s lamp. |
|
|
Shutdown | Remotely deactivates the fixture. When a fixture is shut |
| down, the lamp is extinguished, power to the motors is |
| disabled, and the LED display reads “SHUT DOWN”. If a fixture is |
| in shutdown mode, you must home the fixture to bring it back |
| into operation. |
|
|
SHOWGUN® User Manual | 35 |