Components Introduction
HOW TO USE REMOTE CONTROL UNIT
Install the battery
2
RESET button
3
Sliding cover
1
1.Press the two sides of the cover of the battery component and slide it downward and remove.
2.Insert two AAA #7 Alkali batteries, and make sure that,
The anode (+) and cathode
Do not use Manganese batteries.
3.Press the Reset button with a pointed tool and then replace the cover.
A T. SETTING
C
A
A
After replacement of batteries, the LCD on the remote control unit will display the status.
COMMONSENSE
Please make the remote control unit transmitter aim at the receiver of indoor unit.
There shouldn't have any obstacle between the remote control unit transmitter and the receiver of indoor unit.
Don't throw and break the remote control unit.
8