Operation Manual
PREPARATION BEFORE RUNNING
Raise the front cover, and then install the air filter.
MANUAL OPERATION (COOLING, DEHUMIDIFICATION, FAN)
Basic operation
1.Before running the appliance, press the "MODE" for selection one mode of the dehumidification, cooling and fan.
2.Press the "ON/OFF" button to start the appliance. 3.Press the "TEMP." button to set the temperature you wish.
T. SETTING 
C
2
H.P. | ON/OFF | TEMP. |
3
SLEEP
FLAPMODE
1
ON
OFF
FAN/MUTE
SET CLR
BATTERY | SENSOR | RESET |
COMMONSENSE
●A certain period of time is required to reach the desired temperature since the air of room cycles all the time.
●When appliance works in cooling and dehumidification mode, if blocked by accumulated water drops, then air filter should be cleaned and air fresh filter should be cleaned or replaced.
9
