Operation with the Remote Control Unit(continued)
C
A 
A 
1 HR
TEMP
H . P .
FAN
SPEED
STEP 4
STEP 3
|
| /O | FF |
| N |
| |
O |
|
| |
|
|
|
STEP 2
FLAPMODE
STEP 5 |
| STEP 1 |
|
ON 
OFF
SLEEP SET CANCEL
NOTE
A/C SENSOR | ACL |
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desired.
|
|
| Press the MODE selector button and select the desired mode. | ||
|
|
| For heating operation |
| |
|
|
| For dehumidifying operation | ||
| STEP 1 | For cooling operation | A | ||
|
|
| For automatic operation | ||
|
|
| For fan operation |
| |
|
|
|
|
| |
| STEP 2 | To start the air conditioner, | press the ON/OFF operation button. | ||
|
|
|
| ||
|
|
| Press the TEMP setting button to change the temperature setting to the desired temperature . | ||
| STEP 3 | Adjustable temperature range: | |||
| 30 max. 16 min. | ||||
|
|
| |||
|
|
|
| ||
| STEP 4 | Set the FAN SPEED selector button to choose the fan speed you want. | |||
! | If the fan speed is set to A | (Automatic), the fan speed switches automatically, | |||
|
| ||||
| NOTE | ||||
| according to the difference between the actual room temperature and the set temperature. | ||||
|
| ||||
STEP 5
Press the FLAP button and set the airflow direction as desired.
To stop the air conditioner, press the ON/OFF operation button again.
9 
