Hisense Group KFR-3208GW Using the 12-HourON and OFF Timer, TIMER ON mode Example, Step

Using the 12-Hour ON and OFF Timer

1.TIMER ON mode (Example)

					C
	HOUR
1 HR	TEMP			FAN
			SPEED
.					FF
H
P			N/	O
.		O

FLAPMODE

STEP 1

ON OFF

STEP 2

SLEEP SET CANCEL

STEP 3

A/C SENSOR ACL

2.TIMER OFF mode (Example)

C

HOUR	A
	A

1 HR	TEMP			FAN
			SPEED
.					FF
H
P			N/	O
.		O

FLAPMODE

ON OFF

STEP 1

SLEEP SET CANCEL

STEP 2

After the length of time set for TIMER ON elapses, the unit begins operating.

The display depicted at left indicates that the air conditioner will begin operating in three hours.

Setting Procedures:

STEP 1	Press the MODE button and set the desired operation mode and
	press the ON/OFF operation button.
STEP 2	Press the timer ON button to		set the	time at which you want
	operation to begin. The time can be set for one to twelve hours,
	in one hour steps.
		1	2	3....... 12
STEP 3	Press the timer SET button (which advances the time displayed).

The display changes immediately to its status previous to timer setting, but the

indication remains.

To check the status of the timer while it is counting down, press the timer SET

button .

Cancellation procedure: Press the CANCEL button once again.

After the length of time set for TIMER OFF elapses, the unit stops operating.

The display depicted at left indicates that the air conditioner will stop operating in five hours.

Setting Procedure:

STEP 1 Press the timer OFF button to set the time at which you want operation to stop.

The time can be set for one to twelve hours, in one hour steps.

1 2 3....... 12

STEP 2 Press the timer SET button (which advances the time displayed).

The display changes immediately to its status previous to timer setting, but the

indication remains.

To check the status of the timer while it is counting down, press the timer SET

button .

Cancellation procedure: Press the CANCEL button once again.

A/C SENSOR ACL

12