PRESET FOR USE

PRESET FOR USE

The first time you may want to select language (English or Espanol=Spanish) and preset the tuner to scan only the channels you receive in your area. You must use the remote control for the following steps.

NOTE: Channel memory programming is not needed when using a converter/descrambler box.

PRESET FOR THE FIRST TIME

1 Connect the TV/VCR power cord

Plug the TV/VCR power cord into a standard AC outlet. 2 Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

3 Select "ENGLISH" or "ESPANOL"

Select "ENGLISH" or "ESPANOL=Spanish" using CH or button or SELECT button. "[ ]" marks indicate the selected language.

4 Begin auto preset

Press MENU button to point to "AUTO PRESET"

Then press SELECT button. The tuner scans and memorizes in the active channels in your area.

NOTES:

The TV/VCR distinguishes between standard TV channels and CATV automatically.

If you want to play or record a video tape BEFORE presetting the tuner, you must press MENU button. To preset the tuner again, see "AUTO PRESET AGAIN".

5 After scanning

The tuner stops on the lowest memorized channel. (TV mode: from CH 02/ CATV

mode: from CH 01) You may want to recall the selected channels, you can select the desired channel directly with the remote control number button or CH or .

TO RETURN TO TV MODE WHEN SCANNING

Press MENU button in scanning mode.

21