TIMER
TIMER
AUTOMATIC TIMER RECORDING
You may set the TV/VCR to record while you are away. You can set 8 programs to record on a specific day, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: | MAY 6th, 1996 |
SETTING TIME: | from 7:30PM to 8:50PM |
CHANNEL: | CH61 |
TAPE SPEED: | LP |
PROGRAM NO.: | 4 |
NOTE: You must use the remote control for this procedure.
Make sure...
•Be sure the clock is set to the correct time and date before setting the timer.
•Power must be turned on to set automatic timer recording.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
•Preset the tuner.
Avoid over lap of programs...
There is a case that a program will not be performed, when programs overlap;
•The program with the earliest start time has priority.
•When the earliest program has finished and the programs which should start still overlap, the recording will start in the order of the program number.
•If you programmed as the illustration, the timer recording would be carried out as follows (shaded part is the recording period):
9:00AM - 10:00AM for PROGRAM 2
10:00AM - | for PROGRAM 1 |
1 Select "TIMER PROGRAMMING"
Press MENU button to point to "TIMER PROGRAMMING".
Press SELECT button.
•If you did not set the clock, "MANUAL CLOCK SET" appears. If so, follow page 17 to set the clock and repeat from step [3].
45