RECORDING

time available.

•If "CAPTION1", "CAPTION2", "TEXT1" or "TEXT2" is selected, the On Screen Display will appear for 5 seconds, then disappear.

If you want to check the remaining pause time available using the On Screen Display, press SELECT button. The On Screen Display will appear for 5 seconds.

OTR (One Touch Recording)

This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.

Make sure...

•Power must be turned on.

•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTE: This function cannot be done by the remote control.

1 Select the channel to be recorded

Press number buttons on the remote control or the CH or button.

2 Begin OTR

Press REC/OTR button on the TV/VCR as many times as needed. The recording length will be determined by the number of times you press REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours.

HINTS:

•Recording starts immediately when the REC/OTR button is pressed.

•When REC/OTR button is pressed 18 times, the TV/VCR will switch to the Normal Recording mode.

•To stop the OTR operation, press STOP button on the TV/VCR or on the remote control.

•To show the remaining time, press SELECT button repeatedly until "OTR" appears on the TV screen.

•Recording stops when 0:00:00 is reached.

•Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, eject the tape and the TV/VCR power will be turned off.

43