Hitachi 19VR11B TO CANCEL VCR PLUS+ TIMER RECORDING, CHECKING START/END TIME OF AUTOMATIC TIMER AND VCR PLUS+ TIMER RECORDINGS, NOTE:, While setting a program;

TIMER

Press CH (down) button repeatedly until "EVERY DAY" appears on the "DATE" line. Press SELECT button.

For weekly recording: To record the TV program every week.

Press CH (down) button repeatedly until "EVERY" and your desired day of the week appears together. Press SELECT button.

NOTE: To confirm or change the VCR plus+ code, press VCR PLUS+ button. You can return to step [2].

4 Set the tape speed

Press CH (up) button until your desired tape speed appears. (Example: LP)

• You cannot use the TAPE SPEED button.

5 Exit the VCR plus+ mode Press MENU or SELECT button.

To set another program, repeat steps [1] to [5].

6 Set the timer

Press POWER button to set VCR plus+ timer recording. The REC indicator lights up.

• You must turn off the TV/VCR to activate VCR plus+ timer recording.

If power is not turned off and you continue watching TV, "TIMER REC STANDBY" starts flashing on the TV screen 2 minutes before the programmed start time.

TO CANCEL VCR PLUS+ TIMER RECORDING

•While setting a program; press MENU button to return to the TV mode.

•After setting a program;

1)Press POWER button.

2)Press MENU button to point to "TIMER PROGRAMMING".

3)Press CH or button repeatedly until your desired program number appears.

4)Press ADD/DELETE button.

5)Press MENU button to return to the TV mode.

•While recording is in progress; 1) Press POWER button.

2) Press STOP/EJECT button on the TV/VCR.

If you press POWER button to turn off before the end time, timer recording will continued. Refer to "After setting a program;" above to cancel it.

CHECKING START/END TIME OF AUTOMATIC TIMER AND VCR PLUS+ TIMER RECORDINGS

52