SPECIAL PLAYBACK

SPECIAL PLAYBACK

Make sure...

You must use the remote control for the following steps.

Power must be turned on.

Insert a prerecorded tape.

Before playback, follow steps below.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as those rented from a video shop.

1 Select "USER'S SET UP"

Press MENU button repeatedly to point to "USER'S SET UP".

Then, press SELECT button.

2 Set "RENTAL" to [ON]

Press MENU button to point to "RENTAL".

Press CH or button repeatedly until [ON] appears.

3 Exit the Rental setting

Press MENU button repeatedly until the TV/VCR returns to the TV mode.

4 Start playback

Press PLAY button to start playback. "RENTAL PLAY" appears.

Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1]. Then, follow step [2] but select [OFF]. Press MENU button repeatedly until the TV/VCR returns to TV mode.

REPEAT PLAYBACK

The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without using the PLAY button. There are two selections for Auto Repeat Playback.

36