
English
PRECAUTIONS ON USING HAMMER DRILL
1.Wear earplugs to protect your ears during operation.
2.Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns.
3.Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside.
4.Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.
SPECIFICATIONS
Voltage (by areas)* | (110V, 115V, 120V, 127V, 220V, 230V, 240V) |
|
|
Power Input | 620W* |
|
|
0 – 1050/min. | |
|
|
4400/min. | |
Capacity: concrete | 3.4 – 24 mm |
steel | 13 mm |
wood | 32 mm |
Weight (without cord and side handle) | 2.6 kg |
|
|
Dust collecting adapter |
|
Max. | 100 mm (adjustment possible between 0 and 100 mm) |
Diameter of drill: | 3.4 – 24 mm |
Max. length of drill (overall length): | 270 mmm |
Dustbag capacity: | 0.4 liters |
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) | Case (Molded plastic) | 1 | [Numbers (3) and (4) refer to use on concrete] |
|
(2) | Side handle | 1 | (5) Cap | 1 |
(3) | Dust collecting adapter | 1 | Standard accessories are subject to change without | |
(4) | Dust bag | 1 | notice. |
|
OPTIONAL ACCESSORIES (sold separately)
1.Drilling anchor holes (rotation + striking)
◯ Drill bit (Slender shaft)
Drill bit (Slender shaft) | Adapter for slender shaft | |||
|
| |||
|
|
|
| |
Drill bit (slender shaft) |
| |||
Outer diameter |
| Effective length |
| Overall length |
|
|
|
|
|
3.4 mm |
| 45 mm |
| 90 mm |
3.5 mm |
|
| ||
|
|
|
| |
|
|
|
|
|
◯Drill bit (Taper shank) and taper shank adapter
Drill bit (Taper shank) | Taper shank adapter |
| |
| Cotter |
7