![](/images/new-backgrounds/1180234/18023423x1.webp)
Transfer speed
High speed
Full speed
Low speed
Data Rate
480 Mbps
12 Mbps
1.5 Mbps
Power
Consumption
2.5W (Max., each port)
2.5W (Max., each port)
2.5W (Max., each port)
USB Upstream Connector
Pin Number |
|
|
|
1 | DMU |
|
|
2 | VCC |
|
|
3 | DPU |
|
|
4 | GND |
|
|
USB Downstream Connector
Pin Number |
|
|
|
1 | VCC |
|
|
2 | DMD |
|
|
3 | DPD |
|
|
4 | GND |
|
|
USB Ports
•1 upstream - rear
•4 downstream - 2 on rear; 2 on left side
NOTE: The monitor's 2.0 USB interface functions only if the computer is USB 2.0 compatible.
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you switch the monitor off and then switch it on, the attached peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications
Overview
•The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
•The Flash Memory Card Reader is automatically recognized by Microsoft® Windows® 2000, Windows® XP, Windows Vista® and Widows® 7.
•Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
•All standard file operations (copy, delete,
Features
The Flash Memory Card Reader has the following features:
•Supports Microsoft® Windows® 2000, Windows® XP, Windows Vista® and Widows® 7 operating systems
•Mass Storage Class device (No drivers are required under Microsoft® Windows® 2000, Windows® XP, Windows Vista® and Widows® 7).