1AC power cord connector
2DC power connector for Dell™ Soundbar
3Audio out (rear)
4Audio out (SUB/CTR)
5Audio out (front)
6DisplayPort connector
7DVI
8DVI
9VGA connector
10HDMI connector
11Composite video connector
12Component video connectors
13USB upstream port
14USB downstream ports
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic
VESA Modes
Horizontal
Sync
Vertical Sync
Video
Power
Indicator
Power Consumption
Normal operation
Switch off
Active
Inactive
-
Active
Inactive
-
Active | Blue |
|
|
|
|
Blanked | Amber |
|
|
|
|
- | Off |
|
|
138 W (maximum)*
113 W (normal)** 
Less than 2 W
Less than 1 W
*With Audio and USB
**Without Audio and USB
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: This monitor is TCO '03 power management compatible.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin Number
1
2
3
4
5
6
15-pin Side of the Connected Signal Cable
GND
