Hitachi 24PD manual Anchor setting, Crushing operation rotation + striking

English

Outer diameter

11.0mm

12.3mm

12.7mm

14.3mm

14.5mm

17.5mm

21.5mm

Taper mode	Applicable drill bit
Morse taper (No.1)	Drill bit (taper shank)	11.0 ~ 17.5 mm
Morse taper (No.2)	Drill bit (taper shank)	21.5 mm
A-taper	Taper shank adapter formed A-taper or B-taper
	is provided as an optional accessory, but the
B-taper
	drill bit for it is not provided.

◯13 mm Hammer drill chuck

For drilling operations when using a straight shank bit for impact drilling with a hammer drill.

Straight shank bit	)	13 mm Hammer drill chuck
(for impact drill		(SDS-plus shank)

Chuck wrench

2. Anchor setting

◯Anchor setting adapter (for electric hammer drill)

Anchor size

W1/4”

W5/16”

W3/8”

Anchor setting adapter (SDS-plus shank) (for electric hammer drill)

Overall length: 160, 260 mm

◯Anchor setting adapter (for manual hammer)

Anchor size

W1/4”

W5/16”

W3/8”

W1/2”

W5/8”

Anchor setting adapter (for manual Hammer)

3. Crushing operation (rotation + striking)

Bull point (Round type only) (SDS-plus shank)

8