Front/Rear/Side Panel Controls
FRONT VIEW
REAR/SIDE VIEW
POWER
CH+
CH-
CURSOR 
VOL +
VOL -
PHOTO INPUT
First time use
INPUT/EXIT
MENU/SELECT
SIDE POWER button
Press this button to turn the Plasma Television ON/OFF. It can also be turned ON/OFF by remote control. The “MAIN POWER” button must be at
MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
PHOTO INPUT
Insert USB cable from your Digital Camera, USB memory or memory card USB drive to view your digital still pictures (see pages 27 and 28).
INPUT/EXIT button
Press this button to access the INPUT menu. Press again to exit the MENU mode.
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down ( ) and up ( ) buttons when in MENU mode.
VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.
|
| |
INPUT 5 | L/MONO | AUDIO VIDEO |
| R |
|
Firmly bind the cables. |
|
Thread the square | Hook the band |
hole with the band. | to the claw. |
NOTE: The Rear View of the 55” model is slightly different from the 42” models. One of the differences are the handles that are only present on the 42” models.
POWER button
Display Monitor “MAIN POWER” button
This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for
The Main Power button is located on the broadside bottom, under the label “MAIN POWER”.
NOTE: When the “MAIN POWER” button is set to OFF or the TV is unplugged, the clock will stop and may eventually reset itself.
9
