Hitachi 55HDT52 Schedule, Watch NOW/TUNE to Channel, Delete Recording, Edit Recording

TV Guide On Screen

SCHEDULE:

The SCHEDULE Service screen allows you to review, edit and delete Record and Remind events.

Press the INFO button while the SCHEDULE Service is highlighted on the Service Bar to display a Help screen.

Use the CURSOR PAD or to highlight an event, and then press the MENU button to display the applicable Schedule Options Panel Menu options.

GO TO SERVICE BAR:

Select to highlight the Service Bar.

WATCH NOW/TUNE TO CHANNEL:

Select to exit the TV Guide On Screen system and tune to the highlighted program.

SET RECORDING:

Select to open a menu in which you can set a recording for the program (see page 61).

DELETE RECORDING:

Select to remove the recording from the schedule.

A confirmation Panel Menu will display. Select YES to delete the recording or NO to exit the Panel Menu.

EDIT RECORDING:

Select to open a menu in which you can edit existing information (see page 61).

SET REMINDER:

Select to open a menu in which you can set a reminder for the program (see page 63).

DELETE REMINDER:

Select to remove the reminder from the schedule. A confirmation panel menu will display. Select YES to delete the reminder or NO to exit the panel menu.

EDIT REMINDER:

Select to open a menu in which you can edit existing reminder information (see page 63).

CANCEL:

Select to exit the Panel Menu.

How to Record:

The Record options can be set in the LISTINGS, SEARCH, and SCHEDULE Services. You can also edit record settings for a program in the SCHEDULE Services. There are 3 ways to set a program to record.

•Use the RECORD button on the Remote Control. Press the RECORD button to record the program Once with the current default setting. Each press of the RECORD button cycles through the RECORD frequency of Once (default), Regularly, Weekly and Cancel.

NOTE: The specific Record Icon appears on the tile each time the RECORD button is pressed.

•Use the Panel Menu record features.

1. Use the CURSOR PAD or to highlight a program and press the MENU button to access the Panel Menu.

2.	Use the CURSOR PAD	to highlight Set
	Recording and press the SELECT button to display
	the Record Options Panel Menu.
3.	Use the CURSOR PAD	or to highlight the
	Frequency field and press the CURSOR PAD		or
	to select among Once, Regularly, Weekly or Off.
4.	Press the CURSOR PAD	to highlight the Start
	field, and then press the CURSOR PAD or		to
	select in the range from 120 minutes early to 120
	minutes late. The default time is ON Time.

5.Repeat step 4 for the End Field.

6.	Use the CURSOR PAD	to highlight the Recorder
	field and then press the CURSOR PAD		or	to
	select the Recording device.
7.	Use the CURSOR PAD	to highlight the Keep Until
	field and then press the CURSOR PAD		or	to
	select a save option.

8.Press the SELECT button to highlight SCHEDULE RECORDING. Press the SELECT button again to exit the menu or highlight CANCEL and press the SELECT button to close the menu and return to the highlighted program.

NOTE: Steps 6, 7 and 8 are for connected IEEE1394 recording only.

61

On-Screen Display