Hitachi 55HDT52 important safety instructions Set Black Side Panel, Reset Video Settings

Video

Set Black Side Panel

The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode or use of the PIP modes.

1. Press the CURSOR PAD or to set to ON or OFF.

2. Press EXIT to quit menu or select SET BLACK SIDE

PANEL to return to the previous menu.

Set Black Side Panel

Next On/Off

Off

SEL Return

Set Black Side Panel		On
Next	On/Off	SEL Return

NOTE: To prevent uneven aging when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3 signal with gray side bar.

Reset Video Settings

This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode.

On-Screen Display

1.	Use CURSOR PAD ,	or CHANNEL WHEEL to
	highlight functions.
2.	Press the SELECT button or CURSOR PAD to select
	Reset Video Settings.
3.	Use the CURSOR PAD	to access at the Reset
	softkey.

4.Press the SELECT button to Reset the Video Settings.

You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.

If RESET is selected in Input 1, only Input 1 will return to factory conditions.

NOTE: If YES is selected, the VIDEO MENU SETTINGS will be reset to the original factory settings on all modes during the next power on/off.

	Video		Cable
OR	Sharpness		50%
	Color Temperature		High
	Black Enhancement		High
	Contrast Mode		Dynamic
	Noise Reduction		Low
	Auto Movie Mode		Off
	Aspect
	Black Side Panel		Off
	Reset Video Settings
	Move	SEL Return

	Video
	Reset Video Settings
OR	Select “Reset” to return the video menu settings
	on this Input to the original factory settings.
		Reset
	Select “Yes” to fix the Video Menu Settings
	to the original factory Settings on all modes
	after power “ON”.
		No	Yes
	Move	SEL Return

46